⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

handbrake lever

chuce68
hace 5 años
hace 5 años
Hello everyone I put my comment this same at the last one who gave me help I don't know if everyone who helped me can read it so I tell everyone: I took out the palance of the handbrake and the part that hooks with the cable below was broken to adjust that when I pulled down and adjusted the nut towards nothing, now I have to change the lever. Another question when I lift the car by the driver's side after a while I get dripping oil. It may be that by lifting it I lose oil from the box.
Carlinonda
Carlinonda
3.609
hace 5 años
hace 5 años
When lifting the vehicle laterally under no circumstances should it have oil loss, inspect the bellows of the semi-axles on the side of the gearbox, it is surely damaged.
Mangel HH
Mangel HH
19.786
hace 5 años
hace 5 años
Hi Chuce. The faulty anchoring of the lever. This explains why the registry did not respond. With respect to the loss of oil try to observe its origin, for example if it leaves the semi-axle or its bellows or corresponds to the engine, a drop is not significant, it only controls the levels of box and engine. The smell of oil in the box is very different from that of the engine. Salu2.
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis