⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

At times it does not start, WV FOX 2010

Marcos_42
hace 5 años
hace 5 años
Hello, good morning ... the problem I have is with my car ... this is the best and everything works ... the issue is that repeatedly I do not start, that is, it tends to want to start and does not , I try one or two more times and it does not start and the board turns off completely and the clock is deprogrammed, I push it and it starts at the touch .... then I turn it off and try to start and it does the best for several days and then it does the same to me .... does anyone know what it can be ??? the battery ?? I measured it in operation 13.5 13.7 and with the car off 11.5 and less If someone has a solution or something similar happened, I would appreciate the advice Regards.....
Diego Serantes
hace 5 años
hace 5 años
Marcos, your problem is the battery. If the voltage is less than 12 while the engine is stopped, it sure has a failed plate. Replace the battery, and have the charge measured at the moment with the new battery. This has to be no less than 13.5v with the lights on.
Mangel HH
Mangel HH
19.786
hace 5 años
hace 5 años
Hi. It would be important to know how long the battery is installed, since the condition of deprogramming the board and the intermittent activation of the engine ignition would indicate that the first one is ending its useful life. Salu2.
Marcos_42
hace 5 años
hace 5 años
Thanks Diego very good advice and I did replace the battery .......... I really had doubts because my previous car a Golf 98 I had 7 years and I never changed the battery because there was no need this 2 years ago I have it and I really don't know if the battery was new or not ... but it's already solved, thanks ... Thanks Mangel ...... Congratulations very good 2018 .. Greetings.-
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis