⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

Auto start failure

caimito2
caimito2
132
hace 5 años
hace 5 años
GOOD MORNING FRIENDS MY AUTOMATIC ACCENT VEHICLE HYUNDAI 2006 PRESENTS A FAILURE AT THE TIME OF IGNITION, WHEN TRYING TO IGNITION IT PRESENTS A FAILURE AS IF THE BATTERY WAS DEFINITELY, ALREADY TESTED IN ANOTHER VEHICLE AND ALREADY WASTE THE BATTERY OF THIS BATTERY , WHAT WOULD BE THE DEFECT IN THE START UP WHICH COULD BE TO PRESENT THIS FAILURE, DO NOT BOCINAS, BENDY, AUTOMATIC, SOMETIMES BECOME DIFFICULT TO LIGHT THANKS FOR THE ORIENTATION IN RESPECT
BIN2013
BIN2013
2.689
hace 5 años
hace 5 años
friend probably the fault is in the starter or the wires that feed it!
celentauro
celentauro
3.878
hace 5 años
hace 5 años
There is an expression that says "the donkey is as heavy". Or as the friend says the connections are not right or the starter (Donkey) has a paste inside by the charcoal itself that sometimes does not make contact with the brushes .. You speak of amperage but do not comment on what charge the battery has to time to boot It is normal to have 12.7 volt approx. If the battery is loose it also has those symptoms.
caimito2
caimito2
132
hace 5 años

THE CAR PRESENTS THAT FAILURE MORE THAN EVERYTHING WHEN THE ENGINE IS HOT THAT IT HAS BEEN RUNNING ABOUT 30 KMTS AND THE BATTERY AMPERAGE IS IN THAT ORDER 12.7, THERE ARE TIMES THAT IT HAPPENS UNTIL A DAY WITHOUT PRESENTING THE FAILURE LIGHTING VERY WELL, WHEN IT IS COLD THE MORNING MORE THAN EVERYTHING IS ON TO TOUCH, THANKS FOR YOUR COMMENTS

Responder
celentauro
celentauro
3.878
hace 5 años

If you can take out the starter, check the condition of the brushes, change bushings and a good cleaning. There are houses that sell the complete brush kit. You have to assess how the bendix and the gears are. If they have faces or symptoms of being very worn, get another new or used boot.

Responder
Mangel HH
Mangel HH
19.786
hace 5 años
hace 5 años
Hi. This fault that occurs mostly in hot is usually caused by wear on the starter, coals, bushings and possible condition of the fields. Salu2.
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis