⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

The GOL Power 1,4cc to CNG, suddenly loses strength and does not regul

jubiladojdn
hace 5 años
hace 5 años
Hello, can you help me, my goal power 2012, walking well suddenly slows down losing strength and in that condition does not regulate, the lights of the instrument that marks when it goes to gasoline or gas goes out, I have to accelerate because it does not regulate even in this circumstance I don't know if he goes to gasoline or gas. From already thank you very much, greetings I want to add the following to clarify and add new experience, the failure made it to gas, the truth is that I always go to gas, that is, I don't know if I had done it by walking on gasoline, today after walking a couple of hours at gasoline they eat so Fail in the same way, the difference is that the instrument indicated that it worked on gasoline, that is, it did not turn off. I take into account what Mangel HH mentioned, add the experience mentioned today to know if Mangel continues with the idea of false contact. greetings and thanks
Mangel HH
Mangel HH
19.786
hace 5 años
hace 5 años
Hi. There is a false contact in wiring or connectors including the selector that causes this situation, the Ecu cannot specify at that time the fuel to be used, therefore the Gnc / naphtha / fuel and emulator management drive is not correct. Salu2.
jubiladojdn
hace 5 años

Thank you very much for your collaboration, I inform you of today's experience that I comment on the site "Improve Question"
I want to add the following to clarify and add new experience, the failure made it to gas, the truth is that I always go to gas, that is, I don't know if I had done it by walking on gasoline and today after walking a couple of hours at gasoline they eat so Fail in the same way, the difference is that the instrument indicated that it worked on gasoline, that is, it did not turn off.
I listen to your analysis of the problem. Thanks greetings

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis