⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

Diesel pole 1.9, does not start, but the board works.

omar fernandez
hace 6 años
hace 6 años
Good morning everyone, I tell you something that happened to me this morning when I wanted to start the car as it says a 1.9 diesel pole. As I always do, I let the preheating roller turn off, when I want to start it I remain mute, haha, by this I mean that it does not make the traditional noise of the engine, I told you that the board, the radio, and heating is perfect, my question would be that It may be, thank you very much for the help you can give me, ahh, I want to clarify that the battery is good and charged, I am hector Omar Fernandez. I am an electronic technician and I live in Mar del Plata.
Mangel HH
Mangel HH
19.786
hace 6 años
hace 6 años
Hello Omar. In addition to the correct comments of the companion Celentauro verifies if the ignition key voltage arrives, there may be a problem in the contactor. Salu2.
celentauro
celentauro
3.878
hace 6 años
hace 6 años
Silently listen if you make a small click when you start or do nothing directly. It could be the starter motor that had brushes or the solenoid that had been called or the spring clogged. Tap it with something metallic on top of the starter or geared in third moves the car back and forth. Then try to start it with the key and if it starts you have to change or repair the starter motor. Another option is to verify that there are no loose or damaged cables.
omar fernandez
hace 6 años

Good morning, and sorry for the delay since I had no internet, just yesterday I could install it again, I commented that the issue could be solved, I had to take out the starter and take it to repair, it was the coals, luckily a friend and I could put it, thank you very much for the help.

Responder
celentauro
celentauro
3.878
hace 6 años

I'm glad you solved the problem.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis