⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Cars and trucks

How to extract the radio from Gol Power 1.4 2012

jubiladojdn

hace 6 años

I know that in the lower part of the radio at both ends it has a cavity where you introduce a few "chapitas" to overcome some obstacles and so you extract the radio, I have done it in another model but in this radio it does not unlock, it will have a system different ? Thank you in advance. regards Thanks, Another question, because the radio turns on alone how to solve this problem even turns on after removing the key.

Comentar

celentauro

3.878

hace 6 años

There are several videos on YouTube where they show how to use it, the fact is that according to the radio model that is mounted in each country, the extractors change shapes. There are picks and arrow type. Better a picture helps, or put brand and radio model.



Responder

jubiladojdn

hace 6 años

Thanks, Another question, because the radio turns on alone how to solve this problem even turns on after removing the key.



Responder



Mangel HH

19.786

hace 6 años



hace 6 años

Hi. As Celentauro comments, the models vary with respect to the extraction method, I have personally used up to modified bicycle spokes to remove. In this case it should supposedly have a frame that covers the stereo that is removed under pressure, then it is necessary to remove the detachable front. The next step is to locate the lower locks to the sides, if you do not have the spindles two small screwdrivers (if possible act together) will be used to press and unlock them. Salu2.

Comentar

jubiladojdn

hace 6 años

Thanks, Another question, because the radio turns on alone how to solve this problem even turns on after removing the key.



Responder

Mangel HH

19.786

hace 6 años

Perform a test, when you turn off the engine do not remove the key, perform movement with the same turning it without activating functions to see if the radio turns on, if so there is a problem in the cylinder or contactor. Anyway I suggest you consult the autostereo forum to have a technician diagnose it.



Responder