⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Cars and trucks

heating controls of path 94

fabi1965

1.293

hace 6 años

good night I would like to make an inquiry I have a problem with the heating command of the vehicle mentioned since I move the lever to select heat or cold and does not modify the opening of the heating hopper and I would disarm the part of the command but I do not know how do as I search for videos and I do not find here I leave an image of the front to see the model

the palanquita would be the one that is located down from already many thanks and I hope some answers GREETINGS

Comentar



Carlinonda

3.609

hace 6 años



hace 6 años

As a first step you have to pull out each of the plastics of the levers and the knob, they are put under pressure. The fan selector if you can not remember behind the knob has a flat nut that holds the selector and the front, then with a careful care you are removing the plastic workings of the socket that has on the four faces, presses with a wood or a plastic hard so you do not stay marked the front.

Comentar

fabi1965

1.293

hace 6 años

hello thank you for your prompt response the front I could take out and I found two screws I take it out and I thought it could be pulled out but practically nothing is shifted almost the question is will I have to remove the torpedo?



Responder