Marco2017

I was measuring has 111.5 v.

Good morning, the integrated vertical of my lg heats up a lot by measuring the voltages and the power supply is at 28.8v and the output of the flyback that is 180 is in 190. As I correct

good morning I have a 14-inch global brand tv which does not change the channel just changes the numbering. I don't have the model I'm going to see the plate.

good morning. my goldstar tv does not turn on and change the bly back has a cricket sound. Help me please. I don't know if the problem is condensing. the chassis is the nc -31k

good afternoon please help me I have a goldstar television with chassis nc-31k has no audio check the tda sound voltage and has 14 volts on pin 2 and 4 please help me.

good morning companions I was measuring the TV voltages, for example, the integrated power supply is 28 volts and the output line of the screen is 190 volts and the diagram is 180

Ok i check

Good afternoon friends, I am going to look for the yoke and measure voltages, I have not responded to the yoke

Warm up a lot of friend and clean it but stay the same

The yoke heats up is normal or not

So is the yoke

So is the yoke

[img]http://static.yoreparo.com/imagenes/subidas/1497821453982478333926.jpg[/img]

The model is the 21FJ8RL-L4 this is the model

Dear is the same tv from the image distortion lg forum

Dear as you can see what kind of flyback it is and with respect to the yoke it is well the measures that.

Change the diode and the receiver but I had to adapt another receiver to go the v1838d I put it and the radio is worth the remote control, the voltages are equal to those of the diagram.

Good morning I have a Sony S36 model recorder, it has a problem not detecting the remote control I wanted to see what voltages the sensor of this recorder works with. If anyone can help me.

buenos dias tengo una tv de marca global de 14 pulgadas la cual no cambia de canal solo cambia la numeracion. no tengo el modelo voy a ver la placa.

buenas tardes porfa su ayuda tengo un televisor goldstar con chasis nc-31k no tiene audio revise el voltaje del tda de sonido y tiene 14 voltios en el pin 2 y 4 favor ayudenme.