zorancako

[url]https://www.youtube.com/watch?v=x8xRC27mpno[/url]

On the neck of the balance is a picture of how it is transported. Unscrew the two screws and remove the round aluminum plate. There is a glass of oil in the neck

Erro do sistema: Falha na inicialização do sistema. Software corrompido Reinstale o software SR1.03 ou posterior

System error: System startup fails. Corrupted software Reinstall the software SR1.03 or later

System error: System startup fails. Software corrupted Reinstall the software SR1.03 or later

http://www.scaleservice.net/manuals/weightronix/wl_c.pdf

-put jumper on the main board on S1 and turn on indicator   -push Tare 1 Tare (2 is on the display)   -put 20kg and push Tare (3 and ---- is on the display)   -enter 20000 and push Tare ( 4...

file:///C:/Users/User/Downloads/u%20C%C3%A2n%20Yaohua%20XK-3190-A10.pdf

-put jumper on the main board on S1 and turn on indicator  -push Tare 1 Tare (2 is on the display)  -put 20kg and push Tare (3 and ---- is on the display)  -enter 2000 and push Tare (4 is...

https://www.youtube.com/watch?v=a6c3PepbBVI

https://www.youtube.com/watch?v=-NRvtXRBvXI

http://manualzz.com/doc/6585522/service-ps-12-2008---a5x

HAWK technical manual https://www.northerntool.com/images/downloads/manuals/143592.pdf

Take a picture from the top of balance, and I will explain how to adjust optics.

[img]https://cdn.yoreparo.com/uploads/imagen_post/0001/39/46f12b5c81bc88a83ed57f10f9c320a65751cec9.jpeg[/img]

Try with service manual for Ohaus Adventurer, this is similar mono block weighing cell. https://1l8w3d121kgy2lr9f827bgqfvba-wpengine.netdna-ssl.com/wp-content/uploads/2015/02/ADVENTURER-AX-Service-Manual.pdf 4.4.4 Off-Center Load Adjustment for Block Style Models .

Calibration IND 560 on you tube  https://www.youtube.com/watch?v=rOHJSWU6TqI

SPAN Calibration Setting (C-3) (1) Pressing and holding “Calibration Switch” press [POWER] key. After “CAL” message blinks three times and shows the version of scale, it displays “CAL 1” message. (2) Press [ZERO] to display “CAL-3”. (3) Press [TARE] key...

http://balanzas.yoreparo.com/balanzas_y_registradoras/manual-cas-nd-300-t1060037.html

ERROR 14- Zero exceeds ZERO% and cannot be zeroed Change allowable zero % in ZERO parameter of Setup menu. (ZERO 2%, 18% and 100%) http://www.severnsaleslabequip.com/manual-PDFs/B%20Balances/OHAUS/Ohaus%20CD11%20Indicator%20Service%20Manual%2080250793.pdf