⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

LCD TVs - LED

Pioneer Ple50fzd4 TV, does not start

GRUTTIS

17

hace 5 años

hace 5 años

Good to the people of the forum, I have in the workshop a PIONEER tv, model PLE50FZD4, the flaw is that it does not start its normal operation, turn on, makes the presentation of the brand and there it is. After this does not respond to the commands of the keyboard or the remote control I must disconnect it from the line to turn it on again, any suggestions?

Comentar

gabriel_rcia21

3.963

hace 5 años

I mean if you check the logo.
A new firmware load may solve your problem.



Responder

GRUTTIS

17

hace 5 años

That was recommended to me and we are in search of such information, thank you very much for the suggestion, regards.



Responder

gabriel_rcia21

3.963

hace 5 años

A detail sometimes will not appear the exact model. Example 3260 series searches and does not appear, then try 3250 series so to speak.



Responder

GRUTTIS

17

hace 5 años

Good, indeed in this case the problem was solved by checking the firmware, greetings to all and thanks for the contributions.



Responder



billy58

2.182

hace 5 años



hace 5 años

Hi you have to change the nan flahs greetings

Comentar

gabriel_rcia21

3.963

hace 5 años

Before changing something like a reflow, that is to say, pass the heat welder over the smd chips with due process for these cases to see if it is not cold welding only, it would help.



Responder

GRUTTIS

17

hace 5 años

Hello, thank you very much for the suggestion, regards.



Responder

Reparaciones similares solucionadas

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?

Regístrate gratis