⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Drean

Washing machine motor energizes when touched

Sebastiánnahuelmartinez
hace 5 años
hace 5 años
Hello good afternoon to everyone . Anyone know why the motor of a washing machine could torque when touched? If I plug it into the ground, the light cuts off ... But without the earth I already tried it a couple of times and it looks good, it looks like the engine ... when it touches it kicks (gives power)
Sebastiánnahuelmartinez
hace 5 años

Thank you all for commenting. If the engine is in poor condition, it looks like it is visible inside the rusty plates. Michas thank you all

Responder
apolonio neri vallejo
hace 5 años
hace 5 años
This derivative to mace, this can be due to water leakage and is falling on the engine, you need to disassemble the engine and blow it or put it in the sun, check if there are no traces of soapy water around the furniture, luck and comments.
Sebastiánnahuelmartinez
hace 5 años

Hi thanks. I'm going to put it in the sun now. It is that I am putting together a washing machine and I put this motor that I had saved it, I don't know where it came from. I tried it before installing and it was going well. Now I realize that it gives current. Do you decide that drying it will be solved?

Responder
apolonio neri vallejo
hace 5 años

Check continuity between the power cables and the housing, if there is continuity lost the winding its insulation, disassemble the winding and check if there is detachment of the varnish or place a layer of dielectric and Czech varnish if the bypass to mace persists.

Responder
alturasbal
alturasbal
27.174
hace 5 años
hace 5 años
Hello, it is solved if it is only wet or damp, if there is a damaged coil or a ground wire the sun will not fix it, you will have to take it to a winding workshop, greetings.
Sebastiánnahuelmartinez
hace 5 años

Thank you very much. But if I had a damaged coil, shouldn't it go wrong? Because the engine washes and centrifuges well

Responder
alturasbal
alturasbal
27.174
hace 5 años

It can be with the insulation jumped and knocks on the housing.

Responder
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, as we do not know what type of motor we are talking about, if it is with a capacitor, it is often the case that the ambient humidity or water loss, wet the core laminate and it oxidizes and expands, entering it in contact with the wire of the winding. regards
Fermin 007
Fermin 007
57.307
hace 5 años
hace 5 años
Take the engine for review and rewind, do not leave it because it is dangerous for users, there were cases of people electrocuted by grounded engines or leaking, if you have a multimeter you could check each cable that comes out of the engine with the same housing , on a scale of ohms the highest that the measuring instrument has and if it marked some ohms, that motor must be rewound or changed, greetings and luck.

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis