⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Motors and Windings

connect industrial hand polished winding

mendez matias
hace 5 años
hace 5 años
Dear I had to rewind an industrial hand polisher is quite old and I need a hand to connect the outputs of the winding to the line and to the coals attached a flare that I did looking straight ahead. Sorry for my scheme, I am a disaster drawing, I hope you understand what I need to know specifically in s where to connect the principles and end of the stator. The polisher has adapted a common key (a point like a lamp holder).
SAMUEL VARGAStecnico
hace 5 años
hace 5 años
P1 with the tip of the coal that is close to p1 ....... P2 with the other tip of the coal F2 direct to power ........ F1 to the switch. If it turns you upside down, it would be the other turn like this: connect F2 with the other carbon extruder and the tip that you get out of here you connect it with P1 ....... F1 to the switch ... and P2 to power. Good luck and regards.
apolonio neri vallejo
hace 5 años

The phase goes to the switch as well as the neutral due to safety measures in machine tools.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis