LG turbo drum washing machine does not wash
Yes, thank you very much
I tell you to uncover the engine hit a clean and the rotor, the winding looks good,
I thought that perhaps what would be bad could be the capacitor that has been sold to me with some damage.
but I'm going to test well with the engine to check it slowly.
thanks for your successful comments
take out the engine and test it alone
and turns to only one side, it is magnetized, what repair can be done, or it must be changed.
In my country, Argentina, there is little difference between a rewind and a new engine, so my clients passed the 2 prices and they decide, they always choose to put a new one, before spending make sure that the plate did not receive any damage, greetings .
Yes, thank you very much
I tell you to uncover the engine hit a clean and the rotor, the winding looks good,
I thought that perhaps what would be bad could be the capacitor that has been sold to me with some damage.
but I'm going to test well with the engine to check it slowly.
I also tell you that when moving the tub of the washing machine it works normal but it always stops.
Thanks for your answers.
It works well, but when the temperature is increased by friction, the metal expands and the rotor is magnetized (the shaft is offset, that is, it is attracted to one side) from where the agitator becomes hard.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
