⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

Easy washer packaging 2 tubs

jorge hernandez
hace 6 años
hace 6 años
Could you support me in saying the order of the metal, rubber and cork gaskets of the Easy combomatic washer, both of the washer, and of the dryer (above and below the tub) ... Thank you very much regards
apolonio neri vallejo
hace 6 años
hace 6 años
The impeller seal is placed in the dryer and the washers are in the basket axis, in the washer the transmission is placed, which already has the seal, the washers are placed and the agitator is mounted, in you tube there are several videos of how perform them, luck and comment.
jorge hernandez
hace 6 años

ok thank you very much friend .. Regards

Responder
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
Under the wash tub, there is a rubber washer and then there is a rubber one on the pole or you can put 2, also silicone or sealant, in the drying tub, one smells and an iron washer, down the smell and up the iron and then the hexagonal plastic nut, the same you can put silicone or sealant and squeeze and ready, I guess you already placed the boot water on the arrows, greetings
jorge hernandez
hace 6 años

Yes friend, I had already placed the 2 boot waters that go in the transmission, thank you very much for the support
Regards

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

You're welcome, see you later and regards.

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

Ahh I miss commenting, that I do not use the cork packaging that brings the packaging game, because they break very easily, in fact no colleague does it, we use the smells, in short, it was clarifying just the comment, luck with the repair, greetings

Responder
jorge hernandez
hace 6 años

It is good that he tells me, not to put it, it is seen that they fall apart easily ... changing the subject, I saw your profile and you know a good deal of things, let's see if I ask you some refrigeration later, because unfortunately there was a person who was paid for a service and according to him he changed the motherboard, but not the change, he only put a new temperature control but not the one that should take the cooler, put a shorter one, but hey, therefore I investigate more of the subject ... Thank you very much

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

Ok, we are in touch, see you later, you make a new consultation in refrigeration, that you are well, greetings

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis