⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

Emerson microwave short

Santos Ramirez
hace 6 años
hace 6 años
I have a microwave Emerson brand, what happens is that when I connect everything except the magnetron, everything is fine but I connect the magnetron and this melts the input fuse, I already changed it to a good one and it continues to blow the fuse. Any idea whatsoever, thanks in advance.
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
You already checked capacitor, high diode, door swichs, a question, do you fly it just by connecting the magnetron? or to start it? give more information, greetings
Santos Ramirez
hace 6 años

Yes, I already checked them and they mark me in good condition. It flies me when I start

Responder
Santos Ramirez
hace 6 años

One question, could you tell me how the transformer is connected to the capacitor and magnetron? Since I have doubts, thank you in advance.

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

Upload an image to see how you have them CONNECTED, thanks and greetings

Responder
Santos Ramirez
hace 6 años

What happens is that I can't upload it because I don't have a cell phone, but the transformer has two white and one red outputs.

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

If you have a PC, it's easier than a cell phone, try uploading it

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

of an output of the transformer that then returns down Asia, that is, it has a double cable that terminal goes to the diode and a terminal of the capacitor and the other that leaves the transformer, that is the single or the cable only goes to the other terminal of the capacitor, let's see if you understood me, because it's half complicated so hehe

Responder
apolonio neri vallejo
hace 6 años
hace 6 años
Check the capacitor, place another one and check if the same thing happens, luck and comment.
Santos Ramirez
hace 6 años

Change it to a new one and follow the fault

Responder
Santos Ramirez
hace 6 años

One question, could you tell me how the transformer is connected to the capacitor and magnetron? Since I have doubts, thank you in advance.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis