good afternoon I have a problem with an oster iron model gcstts7014.013 Now the problem in question is that when the water is done it sounds after a while as if it were to be disassembled not expelling the steam. My question is what could be happening here. for your collaboration thanks again.

you have the holes covered with saltpeter. what you hear is steam pressure

look, take apart the entire plate and leave only the platform, then connect the resistance directly since it is very hot put it in a bucket with water, eye, of course already disconnected, so all the tartar that you have will be released, you do that over and over you see until the holes, greetings and luck are uncovered.