Hi. Goodnight. I have a Liliana standing fan, which heats, makes noise and barely tends to spin the blades. The problem arose from one day to the next, which directly did not react. Looking, I realized that I had a short thermal fuse. I bought a similar one and replaced it. The problem is that now it warms up, the blades barely make a shipment and they stop and giving the shipment with the hand (like an old plane) does not work, it never finishes starting. I noticed that it has a fuse that must be started, but I understand that if that were the problem, I would have to start giving it an envy. When it is off, the vanes rotate without problem, so I suppose it should not be the bushings (it only has one year of use). Will it be winding? I would appreciate help. Regards!

Hello companion, possibly your starter capacitor this ko check it out or change a photo anyway it looks enough to see what type of motor is a greeting comment and give like and solution

Hello mate. Try as follows. Disconnect the capacitor and plug it in, and with the hand it turns in any direction, and comments if it turns or stops. Luck.

Even if you turn free with the engine off, it does not mean that the bushings are fine. Change the bushings and the capacitor for one of the same characteristics. Armendo