Oster Reversible Blender Model BRLY07-R00-013 Does not turn on. This blender came very dirty inside, too much cockroach dirt. Cost to clean. The Logic Card Suffered Quite. I have tested the voltages on the front, and there are the voltages, of the 11 Volt main Capacitor, are the zener -5 and 5 volt diode voltages. The 5-volt regulator is OK, and the 5-volt comes out. Copy all the welds. I have measured continuity on the track and they are fine. Remove all switches. I measured all the components except for the Integrated Circuits, from which I don't get their data sheets. And replace the ignition. But it still doesn't turn on, it doesn't turn on the red led standby light, and I have the 5 volts on that Swirtche. The Integrated Small is a GZ212 35A and the Large is TG49137AX07 Atl1000-01 1223. From these you get your data sheets, I imagine that they are also not available as spare parts. I appreciate suggestions. I know that the first would be to replace the card with a new one. But I live in Caracas Venezuela and it is not possible. [Img] https://adjuntos.yoreparo.com/imagen_post/0004/76/86365114f7dd53753a5d02239578d1c99cf0825c.png [/img]

Remove the 2 integrated and clean down them and then replace them and test, if it does not turn on it is the microprocessor that is no longer useful, greetings