⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Video game

install xbox 360 slim chip loose cable

carla0
carla0
carla0
3
hace 5 años
hace 5 años
Hi dear friends, I have an Xbox 360 Slim Trinity board with Rgh chip Coolrunner rev C I would like to know if it is possible to solder the letter C cable in another console point since I uncovered it because it did not gliqueba and notice that a yellow cable had come loose and it is removed to the point of original welding and does not grab another new welding my question is it can be placed in another position or what would have to be done This is a referential image
Comentar
josejdiaz
josejdiaz
josejdiaz
277
hace 5 años

ok friend here I leave two links for you to see the image which is the solution to your problem, comment results when you can and if it is your solution qualify to close the issue, I hope and be lucky.
https://assemblergames.com/attachments/postout-jpg.16072/
http://www.homebrew-connection.org/wp-content/uploads/2012/11/corona_post_cpu.jpg

Responder
josejdiaz
josejdiaz
josejdiaz
277
hace 5 años
hace 5 años
colleague the point that flew you was the post out that represents the letter C of the coolrunner rev c, here I leave the alternative point, I hope and serve you and be very careful when welding, comment results
Comentar
carla0
carla0
carla0
3
hace 5 años

thank you very much for your help I have also seen that a post fix is placed with an adapter

Responder
josejdiaz
josejdiaz
josejdiaz
277
hace 5 años

Of course if you have any at hand you can place it, that if, it will cost you a little more money to repair the console, since if it is a trinity you can weld it from the point of the image that I showed you but if you do not want to risk it better it would be a post fix

Responder
carla0
carla0
carla0
3
hace 5 años

Thank you for your help I will make the post fix I imagine that I will go soldier as it goes in the crown bone there also weld the resistors

Responder
carla0
carla0
carla0
3
hace 5 años
hace 5 años
hello thanks for the help but I don't see the image you placed greetings
Comentar
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad
Maximiliano Resch
$ 60 USD
$ 20 USD
COMPRAR
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
COMPRAR
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis