⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Vehicles

problem with peugeot 504 model 95 throttle cable

dario17
dario17
23
hace 6 años
hace 6 años
Hello, the accelerator pedal became hard and replace the accelerator cable previously by placing a little grease on it (it was just like the previous one that had been installed for almost a year) when I tested it for the two kilometers the inner wire was burned I burned the lining I tried another two times in the same way deducing that the 1st cable was of poor quality but the same thing happens to me ... will it be the grease that produces this? Tomorrow I will buy another cable and I am already scared for that, I consult thanks!
JulioCesarTorres
hace 6 años
hace 6 años
The problem is not in the acceleration gear, it is in the ground wire that connects the body with the engine, or the ground wire that connects the negative pole with the engine, check the ground connections if you want a quick solution place a cable direct from the negative battery terminal to a metal of the motor block.
dario17
dario17
23
hace 6 años

Thank you very much friend Julio Cesar Torres! I suspected something of that I told you to install the fourth cable with my mechanic and re-produced the fault I will check the ground cable or directly then I thank you very much>! As I doubt I tell you how it was then that it worked on the first cable for more than a year? Thanks again for your time. Tomorrow I check.

Responder
dario17
dario17
23
hace 6 años

Solved friend ... it was a dough cable, it was perfect now ... again, thanks and see you soon!

Responder
JulioCesarTorres
hace 6 años

"As it is then that the first cable worked" the ground connections often begin to fail, the fault may be of a false contact, which allows a small loss of current, but these failures are growing, until the contact is made quite bad, and the current tries to go through the gualla, being this steely behaves like a resistance, generating high temperature in it.

Responder
dario17
dario17
23
hace 6 años

great! was that greetings ...!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis