⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Motorcycles

change from cdi to honda mtx 80

Joaquin Quijano Linares
hace 5 años
hace 5 años
I changed the cdi to the motorcycle because the spark plug did not sparkle. With the new cdi the motorcycle starts but does not rise at full speed and when it stops and cools it does not start and I have to remove the spark plug and give the starter pedal several Sometimes without spark plug to start.
JulioCesarTorres
hace 5 años
hace 5 años
Use the original module or use a different one, if you had used the original it could be a low supply voltage.
MJGTSAS
MJGTSAS
4.613
hace 5 años
hace 5 años
As you say the motorcycle drowns and when you take out the spark plug what you do is ventilate the cylinder so that after it starts, verify that the exhaust system is clean over the entire silencer because it is usually covered with carbon and oil from the mixture.
Joaquin Quijano Linares
hace 5 años

The bike still has no speed and I have removed the silencer and the exhaust pipe.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis