⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Motorcycles

help my motorcycle melted or burned all the lights of my motorcycle

Gerardosrbike
hace 5 años
hace 5 años
Hello help, today I went to ride on my motorcycle press 125 but it was something different than normal because I decided to roll across the field and the road was very bad I don't know if it had to do anything with the lights and they were burned by the vibrations. And my question is that, will my motorcycle have a short? Or would the vibrations be the cause of this! To take it with an electric or change the bulbs myself. (eye) one day before it happened to me I didn't turn on the headlight with the long lights or cut only the focus of the room. could you please help me, just turn on the one of the revolutions and the lighthouse room but very little almost nothing
MJGTSAS
MJGTSAS
4.613
hace 5 años

Do you have any idea how to measure voltages with a tester? Comment this to be able to guide you in some checks.

Responder
Gerardosrbike
hace 5 años

If I have one with a tester or multimeter, look I tell you today in the morning I changed all the lights and they returned to work normal and a while ago I climbed a "slope" and therefore I accelerated a little more and the back one burned although it does work when brake but also the mileage did not work anymore. And I notice that when I accelerate the lights are very powerful.

Responder
MJGTSAS
MJGTSAS
4.613
hace 5 años
hace 5 años
I measured the voltage that the battery receives, with the motor regulating (approx. 1500 rpm), accelerated to about 3000 rpm and repellent with the lights on, you should have about 12.5 to 13 volts regulating, acceleration should not exceed 14 volts after starting the engine and then it should go down to 12.5 12.8 volt and with all the lights on it should not exceed 13.5 to 13.8. comment on the values you measure.
Gerardosrbike
hace 5 años

when I revolutionized 3000 the headlight burned and the voltage was 15.3, also before doing so I left it and it rises tremendously and more with the long

Responder
MJGTSAS
MJGTSAS
4.613
hace 5 años

Check if the battery is not short but that is how the regulator fails before changing it, check if it is good mass.

Responder
Gerardosrbike
hace 5 años
hace 5 años
Change the voltage rectifier regulator and matter fixed! Thank you!!
MJGTSAS
MJGTSAS
4.613
hace 5 años

I'm glad you could solve it. Greetings.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis