⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Motorcycles
How to disassemble the float?
hace 5 años
hace 5 años
Good I have a Yumbo City 125cc and I do not know how to disassemble the float, I saw some that have 4 screws that hold it to the tank but this is not the case (or not found) is like thread if someone knows how to remove it I would greatly appreciate it ...
It's system is the same as this photo
https://imgur.com/a/UlziV
https://imgur.com/a/UlziV" target="_blank"> 
https://imgur.com/a/UlziV" alt="" />
hace 5 años
hace 5 años
Hello greetings this float is half-turn I think it's the opposite of the clock hands
hace 5 años
THANK YOU! Remove it and notice that the float is not damaged or out of place BUT even if it is not well mark the fuel level, take out the sensor and move with my hand the float out of the tank and if it marked but when I put it it did not mark and if I move the motorbike raises and lowers the level but when I stop moving it hard it stops marking ... will it be necessary to change the entire sensor?
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad