⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Automotive electricity

I am looking for automatic cutting circuit for battery charger

nel294

hace 5 años

I am looking for some automatic cutting circuit for my loader debaterias, I leave an image of my circuit so you can advise me on what automatic cutting I can put, thank you very much. [url=/ver-adjunto/aHR0cHM6Ly9jZG4yLnlvcmVwYXJvLmNvbS91cGxvYWRzL2RlZmF1bHQvMDAwMy81MS9jYXJnYS05ODA5OC5qcGcgins]

Comentar

JOSE MIGUEL SIRGO PASCUAL

6.953

hace 5 años

Comentar

JOSE MIGUEL SIRGO PASCUAL

6.953

hace 5 años

I send you the complete scheme with power supply included. For the circuit you have, you only have to omit the part of the transformer and the diodes and place what you already have mounted so that the relay acts as a switch.



Responder



Ennio Montenegro.

44.317

hace 5 años



hace 5 años

You asked in another question from 2 years ago. The base is the one on the left with a pink line, which is connected to the output of regulator 7805. The emitter on the right side, with a red line, goes to the regulated output fuse. And the collector goes to the positive.

Comentar

luiszanel

hace 5 años

Hello, I made this circuit with 5A current, but reached the cut in both 13.8 and 11.5 the relay starts to oscillate. What should be modified or added so that this does not happen? And also would we have to modify something to load with 10A? Regards...

Comentar