⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

Auto chevy C2 suddenly went out and it didn't start anymore

Carlos Meneses Hernandez
hace 6 años
hace 6 años
Hello excellent afternoon yesterday when I was driving my car I suddenly turned off it is worth mentioning that it is a chevy c2. I did the rigor check band distribution, spark on the spark plug wires check the oxygen sensor. the valve iac the crankshaft sensor and according to me everything goes well and it seems that no fuel also arrives on the board engine appeared in yellow if anyone can help me please in advance I would appreciate your cooperation
Forzos
Forzos
620
hace 6 años
hace 6 años
Hello, and what did you check the timing belt? that is not cut or is not out of point? Do both points match?
Carlos Meneses Hernandez
hace 6 años

No brother the check only yesterday physically

Responder
Carlos Meneses Hernandez
hace 6 años

But it's ok just the detail of the points don't check

Responder
Forzos
Forzos
620
hace 6 años

Check that you are not out of point to discard that and then tell me

Responder
Carlos Meneses Hernandez
hace 6 años

Okay

Responder
Carlos Meneses Hernandez
hace 6 años

That good brother good afternoon I commented finally I managed to start the car but I have a detail connected and disconnected the map and rattling the engine and the yellow warning is still on

Responder
Forzos
Forzos
620
hace 6 años

Hi, how did it turn on? The engine (amairllo icon) must be scanned to know which sensor is the one that is failing, since the Chevy have been several ... with the scan you will know exactly which one is causing the problem

Responder
Carlos Meneses Hernandez
hace 6 años

If friend told you about the car, he turned on a jingle, check the map sensor was disconnected and when the engine was switched on, the engine was turned on but the engine did not start and I disconnected the map and started
besides the smell of gasoline is perceived in the exhaust

Responder
Carlos Meneses Hernandez
hace 6 años

And the jingle bro continues

Responder
Forzos
Forzos
620
hace 6 años

Yes, it can be the map. It may be another sensor, I reiterate that to know exactly which one it is or which one it is, it must be scanned.

Responder
Carlos Meneses Hernandez
hace 6 años

Ok, I'm just going to try another chevy's bad and if it continues, it fails, I will scan it and tell you, brother, thank you

Responder
Carlos Meneses Hernandez
hace 6 años

How about good brother already checking my car check the coil and I have no spark in cylinder 2 and 3

Responder
Forzos
Forzos
620
hace 6 años

Hello, check that the coil's current arrives if it arrives, the problem is the coil

Responder
Carlos Meneses Hernandez
hace 6 años

OK brother

Responder
Carlos Meneses Hernandez
hace 6 años

Good brother, I told you today I tried another coil and the fault persisted, it occurred to me to move the connector a bit and it normalizes in motor so it is the connector that has false contact what I do not understand is why it turned off and I did not want to start, I will change it and I'll see how it works

Responder
Carlos Meneses Hernandez
hace 6 años

In fact until the warning light went out

Responder
Forzos
Forzos
620
hace 6 años

Hello, if it went off when moving the card, I stop sending the spark to the combustion chamber, it is logical, without spark there is no exploration without exploration the engine does not work. Review the file and change it if necessary

Responder
Carlos Meneses Hernandez
hace 6 años

OK brother

Responder
Carlos Meneses Hernandez
hace 6 años

Brother, I told you, I changed the harness and started the car well

Responder
Forzos
Forzos
620
hace 6 años

Perfect, rate the answer as "solved" so another person can find it quickly and maybe your experience will help.

Responder
Carlos Meneses Hernandez
hace 6 años

Ok brother thanks for the tips

Responder
celentauro
celentauro
3.878
hace 6 años
hace 6 años
If the engine fault appears in yellow, you will have to check several probes and the particulate filter as well as the catalyst.
celentauro
celentauro
3.878
hace 6 años

As an accepted solution, it would have to be mine and not the one with an out of point belt?

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis