⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

sapateo to go out first

Marcelo Oscar Rita
hace 6 años
hace 6 años
hello I have a problem both hot and cold when going out in first sapatea the car peugeot 505 sr model 82 told me that it can be the rubber bellows of the clutch or the engine legs before I forget not always but it happens to me to pass the change my question would be how I realize what is broken or worn because lowering the gearbox that I already did to change the starter crown is a lot of effort since I do not have the winch dearmar rear train cardan lower engine take out cardan to just be able to lower the box and more is just a lot of effort I would appreciate a response from those who know much more than me From already thank you very much
celentauro
celentauro
3.878
hace 6 años

What is zapateo for you? When you start the gear and loosen the clutch pedal do you feel like tapping and trembling? Another thing can be the cardan and its elements, one is the bearing that supports it, usually breaks the silemblock and gives some dry blows.

Responder
Andres Fabian D'Antonio
hace 6 años
hace 6 años
Control the steering wheel that is within the tolerance that does not have oscillation and the clutch system ... if the change comes in it is no more box if it enters with difficulties the one that is putting you resistance is the clutch .. there is something in the clutch system ..control from the fork, ruleman, diaphragm, disk mass, flywheel ... there is something wrong there ..
Marcelo Oscar Rita
hace 6 años

Yesterday, although I was sapateating in prmera but yesterday what I wanted to get in first and I did not get the change I had to turn off the car and just entered the change I pressed the clutch to reveal it and I could just ride the car

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis