⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

Strong thunder when switching on and accelerating in ford topaz

J. E. T
J. E. T
810
hace 6 años
hace 6 años
Well coming back with the topaz this time is a problem that was recurring but now it is permanent The detail is that when I start or accelerate the engine or when going in reverse or when it goes on 3rd in the engine a trtrtrt is heard, I don't know how to describe it but it is like when it hits metal with metal similar to the sound of oil-free connecting rods It does not affect the operation at all but it is very annoying the engine is well made of oil is a little past so I rule out that the problem comes from that No matter what I was investigating and I found many similar cases and it can be anything from a broken connecting rod a piston destroyed a damaged valve or that the signal has play Someone has had this problem that tells me how he solved it tomorrow I go to the mechanic but I want to be prepared so that Nose takes advantage of something that can be a small fault and wants me to throw that it is something serious to charge me more The car is the one already mentioned by my Ford topaz gs 91 aut 4cil That and someone hand me in this because there were already many failures and I want to sell it but that's not going to give me anything Another thing that is worth mentioning is that 1 week ago I was knocked on the passenger door from there onwards the steering wheel dev had a little turned to the left so that it goes right if the car deviates to the right the strange thing is that if accelerated to more than 90 the direction straightens but when decelerating returns to the same Well I hope your helpful help If necessary, I can record a tapping sound and upload it as an attachment
celentauro
celentauro
3.878
hace 6 años
hace 6 años
As you explain at the beginning the noise was recurring, it only did it when accelerating and it suddenly goes away, it gives me that they are the hydraulic drums, something easy to replace and it is not expensive. As for the front train you have to make it look. The blow has affected some element of the suspension, engine leg, link, etc.
J. E. T
J. E. T
810
hace 6 años

I hope you are right because it is my daily use car and my most necessary work tool and have stopped there I do not like today I go with the mechanic and I told them that it was what came out

Responder
celentauro
celentauro
3.878
hace 6 años

When you find out what it has happens and comments.

Responder
Ennio Montenegro.
hace 6 años
hace 6 años
José Without hearing the noise, it is impossible to guess. Even a diagnosis can be given that the engine should be operated without needing it. Regarding the steering, the chassis quadrature must be verified in case it deformed or affected only the alignment of the front train. What you mention is that the right wheel is out. This is detected and corrected by aligning the front train.
J. E. T
J. E. T
810
hace 6 años

Well today he recorded an auido or video where the sound is appreciated and I attached it so that you can appreciate or rather hate the sound and about the direction I suppose that I will take it later to alignment and balancing aver that they design me

Responder
J. E. T
J. E. T
810
hace 6 años
hace 6 años
Well folks sorry for not responding before but I've had a brutal amount of work on On the car the sound was disappearing and 2 weeks ago I decided to go to work on the petrol oil check I put the bass drawer and left very well listening to music and about 20 or 30 km from home VAT on a slow curve and when you accelerate new mind just listen to a tttrttts like when you think of the wrong change in a standard car Immediately I was bordered with the remaining impulse and went down to check for some reason I was throwing oil with jets and no longer wanted to start it just was heard as the march entered alone And in summary, after stretching the mechanic, he told me that the toothed ring was broken, the Carter's gasket was damaged and, to top it off, the crankshaft has play So I think that the topaz is left for now I have not got a mechanic to come to repair it because of the bad reputation of the topaz so thanks for your help I should pay more attention to the fault but well hopefully this will help someone later Thanks and salu2
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis