⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

semi-trailer for fiat palio

ezequielaso
hace 6 años
hace 6 años
good nights, wise of the forum, I have doubts when extracting the semiaxis of the pallium, I was able to extract the side of the mass, but next to the box I do not find the return, nor I encourage to touch it because they told me that there is a part that disarms if I throw it, someone who can explain how to do it? I would be very grateful
charly48
charly48
1.712
hace 6 años
hace 6 años
You have to remove a triangular shaped plate, with three screws that screw in the housing, this plate holds the dust, you will need a tube of 13mm and a prolongation as long as you can, ideal 70/80 cm. to remove them will easily come the semi- complete axle. Note: you must remove the oil from the box before disassembling, otherwise it will fall when the axle shaft is removed.
ezequielaso
hace 6 años

Hi charly, is this procedure valid for both sides? Or just for the driver's side?

Responder
charly48
charly48
1.712
hace 6 años

They are equal.

Responder
ezequielaso
hace 6 años

thanks charly pull the both semi-axles without any problem

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis