⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Cars and trucks

noise when clutching the clutch pedal gol power 1.4 year 2012

jubiladojdn
hace 6 años
hace 6 años
Hello, to the community, in some occasions the clutch noise is not the characteristic noise of crapodina and in few occasions it costs to put the retroseso, it is a goal power 1.4 c3 year 2012, I never happen something like that, (it is clear when patina, when the changes do not enter and / or noisy crapodina also when it starts with problems does not stop until the change of the spare part is made), you can regulate the cable of this model to see it with the naked eye has no regulation, like change it, from now thank you How about today I asked for the price of the clutch, also gave me the price of the cable, yesterday I could not put first then I entered and did not fail until today, besides not skid and all changes, sometimes feel a gli gli, I think when he pressed the pedal, it is not easy to describe the noise he made when he pressed the pedal. I asked the kid to tighten the pedal while I watched the movement of the cable entering the top left of the case listening to the noise I mentioned, I am waiting for information, if possible photos and / or sketches. from now thank you
ursulita024
hace 6 años

Hi, do not detail well what noise is or what fault it presents. So you may have broken the grapodine or the clutch fork. The cable could be unhooking, stretching, hence the lack of "pedal". I do not remember if you have that model pedal autoregulable, it would be good to comment. If you can change cable and put one adjustable.

Responder
sanmartiniano
hace 6 años

what q happens to the kilometers of use softens the floating mass of the disc and starts to make noise, so I ask if the step on the clutch is gone

Responder
ursulita024
hace 6 años

the goal does not carry bi-mass, it is conventional. so to me the experience is the plate that is passing bill of mileage. change embreague and holy remedy

Responder
sanmartiniano
hace 6 años

Hi how are you doing? q is not bimasa, but the springs of the center usually soften and passes the vibration to the box and makes noise, I do not know if I explain myself well

Responder
sanmartiniano
hace 6 años

lei looks wrong, it does when clutch tightening

Responder
sanmartiniano
hace 6 años
hace 6 años
Hello, good day, how many miles do you have? and the stepping on the clutch is not the noise?
jubiladojdn
hace 6 años
hace 6 años
Hello, grateful for compromising on this issue, I tell you that the cable had a 2.5 cm set now works well missing regular cable, this cable goes through the upper left of the clutch housing and exits through the upper right of the same and that is where I adjust it by adjusting the threaded butterfly, now I ask to change it in the future, the butterfly will be disregarded by where I regulate it and then I remove the cable through which it enters, I will not let loose something inside the shell I say because of doubt ; my car has 130000km and all the cars I've had never repaired clutch before the 160000km
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis