xmars20

HELLO IF I FIND THE PROBLEM CHANGING THE AUDIO INTEGRATE

HELLO my friends I have this audio device sanyo dcl 540 has no audio I was checking the speakers testing them on another computer and they work check diodes ok transistor d source ok I was measuring the audio output...

[size=120] Hi friends, I am making a change of box of this drean model I have already repaired several but in this case I find a problem since I never wanted to know if the new sheet comes where the...

Hi, I have an aurora engine from the old ones and I am testing its consumption since I have 9 engines that I have to prove that I have taken out of a washing machine that people throw away, for...

Hello friends, as the title says, I wanted to know why touching the cabinet of the washing machine gives a little current this Lavarropas carries a capacitor behind antiparasitic I made him change of rollers and now everything goes but...

GOOD AS THE TITLE SAYS I WOULD LIKE TO REMOVE A DOUBT THAT THEY ALSO CAN HELP OTHER COLLEGES OF THE FORUM I WANT TO KNOW WHAT WOULD HAPPEN IF A 16 UF TRAINER WOULD BE DEVALORATED WE ASSUME THAT...

Hello friends I have this problem with a 7500 top load glass in which I changed the box was destroyed by a new change the water pump and motor capacitor that was a bit undervalued I do not know what...

Hello friends, I have doubts when changing the 12 uf capacitor of an acquarius 6500 top load since it is undervalued and they sold me a 12.5 uf when measuring it with a capacimeter measuring 12.90 up to 13 uf...

Hello friends of the forum I wanted to know when changing the box of an acquarius 7500 glasses I wanted to know if you have to put grease on the retainer because I have seen a video on youtube that...

Hello colleagues someone touched this microwave that does not heat does not have a high voltage fuse, check the magnetron and it is ok, it is resistant and it is not derived to ground intact antenna. Check diode with 12...

[img]https://cdn2.yoreparo.com/uploads/imagen_post/0004/04/066118b7e7fe4abd3ccca21a440e15a7657f5080.jpeg[/img]

Hello friends Alturasbal and Guillermo seems a lie and weird but the problem was the bellows this bellows that I put is a bellows with a spike but it is not the original of Drean is a copy of hard...

Hello friends I wanted to ask you if there is someone who solved this fault that until now I could not solve it in my case it is violently shaken when centrifuged until it runs from the place and then...

Hi, The sub-frame indicates the power, power and impedance Z of the speaker coil is different. STK412-090 = power 50W + 50W / power + 60V and -60V / speaker Z = 8 ohm STK412-000 = power 60W + 60W...

Colleagues I enter this microwave hitplus that has me disoriented with what it does when I turn on the door turns on the focus everything well I put a cup of water the closing I give it to warm up...

Thank you

hello how would you like to know if someone knows how to manufacture a tool to remove the nut holding the drum of a washing machine lg model wf -t1202tp of which diameter is said nut

hola tengo este horno que me lo trajeron con el problema de que no calentaba el unico problema que tenia era el termostato de 1/2 vuelta de 250° lo reemplace por uno nuevo pero no corta antes de colocar el...

Hola amigo tengo este.microondas BGH quick chef que el año pasado me.entro con la falla que se apagaba solo al calentar unos 3 minutos. resulta  que revise todo y estaba todo bien pero al sacar el termostato del magnetrón y...

HOLA amigos tengo un problema con este microondas atma en el cual no enciende esta muerto ni el display enciende tiene un problemas de tarjeta he revisado diodos resistencias bobinas y todo ok le cambie el ic lnk364pn Y LOS...