victor o ic que eu tenho é tda17821 pino 1 16v
Victor Flores Martinez também não tem som no DVD
hello friends I have problems with this TV le samsung model un40fh5303gcfv the problem was that it was heard but did not look had two LEDs burned it changed and blinked but did not light I noticed returned and had...
hello friends good afternoon I wanted to know if this aomei partition assitant program is used to fix hard drives from other computers with damaged files
[img]https://cdn.yoreparo.com/uploads/imagen_post/0002/67/e0de5045e37de2632c6b3be0bfc5135ee75dc434.png[/img] [img]https://cdn.yoreparo.com/uploads/imagen_post/0002/6/3168f3b3f8b3f8b3f4334f8b3db3db3d9.png[/img] medar58 I looked like I found the burned resistor is the r807 is at the source right where the str goes is 0.22 ohm 1w I hope this is the cause [img]https://cdn.yoreparo.com/uploads/imagen_post/0002/48/1919c90cc5e0c53dafb68ca00bfc504ad642e4eb.jpeg[/img]
hello good day friends I have a televior brand admiral model: tkf-2100a chasis.ptvm03 it didn't turn on it had the tsh d1651 burned it replace it with a tsh d1555 I put the same thermal paste when I went to...
hello tobiastv solved it, you were right a false contact solder the connections with flexible thin cable from the main to the source and jewel not asia contact the terminals of the wires many crack greases
Hi friends, I have a Samsung TV model: UN32D400N does not turn on the red light of Stanby. the plate model is pd32a0_bsm I leave a photo I fixed all the welds and they are fine [img]https://cdn.yoreparo.com/uploads/imagen_post/0002/86/36e3affdd6ca099db6c0e9e13861baf55447b53a.jpeg[/img]
yes friends victor flores martinez, El LInce, laclinicatvsa many thanks
finally the sound comes out it was the sound ic I am very grateful to all those who helped me. I was getting tired haha
I tested the audio ic outside the chassis pin 10 and 12 marks me 42 ohm The ic I have is a tda17821
Good morning friends, I swipe the exit to see if there was any noise at all I'm going to change the audio output and the 33v already arrive at the tuner change resistor r211
Ok friends thanks For his patience. Tomorrow water the test Now I am in another job
Ok friends i will be The proof Layers that is the micro Why 35v don't arrive To tuner