Friends of the forum, good afternoon. I have a Yaxun 881D + soldier station (the one with two visors) and my problem is that when I place the captive handle, I turn on the machine and regulate the temperature once I release the knob at the desired temperature it drops immediately to 016 degrees making That the tip never take temperature. The heat handle works perfectly Thanks in advance

good, on this same station, and on the soldering iron, (or captive XD), the viewfinder appears when the predefined temperature is turned on but then it remains with the three dashes as in the viewfinder of the air gun when it is at rest (which is on but it does not heat or throw air), but when the gun is at rest the scripts remain when I disconnect the gun these scripts flash and this problem apart from not heating and the viewfinder with three scripts also flickers, I deduce that it is as if I did not detect it , what happened to Ventastodocell had already happened to me with the gun and it was also a cable, but in this case I already tested and They're fine, the first thing I thought was that the resistance had burned and this gives me 14ohms ... I don't know if that's okay. I am afraid to buy a new tip and that it will not be solved, although I will do it the same way, I will disarm it and the last story but if anyone has an idea from now thank you very much, Another thing is that I don't know if it's okay