Salute .. I would be guided to help me I have a hyundai model hf-2215 TV that does not turn on change the integrated the main filter I get a voltage of 192 volts .. and in the electronic layers when I measure voltage between me and I do not give voltage and measured continuity in each diode and they are fine and in the output transistor bone the orizontal I I measured continuity with and in the first talk and in the third one it measures me in colto and when the solder measures me in good condition well I said voltage to the flyback and it gives me a voltage of 50 volts please dementia an idea to solve it Thank you very much

good horizontal transistors sometimes come with damper, so between the first and the 3rd pin there is a diode ... look for the model to see or say it here .. measure the resistance and the mosfet of the source if you have

suggestions. First what was the fault and how integrated did you change it. 1.- you remove the flyback and the hoirizontal output transistor, you place a 75 / 100w focus on the ground bmas, in this way you can check only the power supply. you connect the plug, press the power switch, check and see how much you have of bmas. greetings everyone. Felipe ascencio