⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Tube TVs
Tv philco 14v7 + b elevated
hace 5 años
hace 5 años
good morning colleagues I am working with this tv which came burnt the horizontal transistor in short and also the 160v zener in short which replaces the 160v zener and when plugging in the network the tv has the + b in almost 180vol which is Too much on the board says only 133vol that it could be causing the source to not regulate the chassis well is CM-003 MAIN
hace 5 años
Yes, yes, this is my suspicion, but I want to be sure, I eat it because it is quite expensive
hace 5 años
GOOD NIGHT VICTOR CA I'M ANOTHER TIME WITH THIS TV AND CHANGED THE DMP AND NOW THE VOLTAGE IS CORRECT THE TELE ON IS LISTENED WELL FOR 10 SECONDS AND IS SEEN WELL AND THEN IT CAN BE OFF
hace 5 años
I have realized that being alone without the video cable on is on, it does not turn off but when the video is automatically switched off, it looks good and sounds good, it will be the problem that has a problem
hace 5 años
victor issue solved you were right I took the r814 that had a 0.27 and I put a 0.68 and solution does not turn off for more than an hour is on thank you and I value you as a solution friend
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad