Tv kenix kxtf2106 micro replacement
Televisor KENIX KXTF21
Televisor KENIX KXTF21
I think it is not so, they must be 51 K and they are the ones in the source control circuit, I recommend that you place it again and remove the L453 and place a 60 watt bulb in parallel with the C528 and measure the voltage there and comment the results.
friend the ic. om8370ps-n3-2 according to data does not appear as replacement of ic. previous
Correctly place the 51k resistors and perform the test that I indicated before changing the onechip
what a good fact of the two boys friend then I was wrong with the resistances is that at first I found them open one is r539 and the other is r539 a and in replacement of the two still
put a 10k thank you electronically but I think the mike is bad because I was working with this board alone without the screen and those micros as it is damaged very easy I will put the corresponding resistors and do the test you say greetings
good morning friends I did the focus test it turns out that now the problem got worse because I had solved the mike before and I stayed two tracks together when I did the test with the focus I had no time to measure anything because it started to smoke at (r561) then I disconnected it and half-cut the (vd564) and the one that made it measure in short was the micro one chip now I have another micro but I want you to give me your help Again what value is the resistance (r561 ) regards