⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Tube TVs

Tv tonomac libya vertical

Justobernardo
hace 5 años
hace 5 años
] .jpeg [/img] I put a stv 9325 and I turn on the screen
Victor E
Victor E
65.783
hace 5 años

vertical line or horizontal line, are two very different faults

Responder
manolo karvalo
hace 5 años

Hello Friend. where it does not open the screen from top to bottom or sideways

Responder
Justobernardo
hace 5 años

Excuse me from top to bottom thanks

Responder
manolo karvalo
hace 5 años

friend. First change the filters that I indicate and I see that ic. that you have replaced this bad because it gives you those colors and the ic.vertical had the tv. What number is it

Responder
Meygil2017tecnico
hace 5 años
hace 5 años
Greetings your problem is in the vertical circuit .. verify that stage and replace said integrated friend greetings.
hpiedr
hpiedr
80
hace 5 años
hace 5 años
Greetings, colleague check the low value filters that are in the vertical. They produce that fault
Justobernardo
hace 5 años

The one who had the TV is STV8172

Responder
Justobernardo
hace 5 años

Amigaso the one who had is the STB8172

Responder
Justobernardo
hace 5 años

I thank those who bothered to answer me I tell you that and replaced the etv8172 with an LA 78041 AND THE TV completely opened the screen only that this you see with the trembling image as vibrating a little now I will have to change the filters of the stage to know that achievement or I solve the problem I have a restlessness is normal that the heatsink of the ic LA78040 quite hot or I have another problem thanks

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis