⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Tube TVs

daewoo tv model DTQ-13Z5SC when connecting antenna turns off

oscar gomez2014
hace 5 años
hace 5 años
Good colleagues came to me TV brand daewoo model DTQ-13Z5SC chassis: CN-001P looks very perfect image but turns off when connecting the antenna to turn it on again I have to unplug it and plug in who could give me clues with this fault thankful colleagues
yoelsi
yoelsi
415
hace 5 años
hace 5 años
colleague if I am not mistaken, I am more than sure that it is the regulator of the source or the small filic that brings the source luck
luis tartaglia
hace 5 años
hace 5 años
Download the free diagram here. Have you checked if by AV placing a DVD? When the scribctambien goes down a little, it turns off? The + b must be 133v, control C 814 and C820. Like R 814, if it is bad, the TV turns off because the OCP is activated. It can also be something else. https://www.electronica-pt.com/esquema/tv/daewoo-esquemas-tv/daewoo-dtq-14z5sc-chassiscn-001p-17586/
oscar gomez2014
hace 5 años

Thank you colleagues, I will do the suggested

Responder
oscar gomez2014
hace 5 años

Q more colleagues greetings I tell you change the line filter of 160v 47mf
The small filter of 50v 4.7mf and nothing remains the same otherwise, colleague can you tell me what will be the protection transient to do a test since I see that the sharp image looks good but does not last turns off

Responder
luis tartaglia
hace 5 años

By your comment you did not change the C 814-de 100uf z 160v.
And the R 814.
Let's assume that it also turns off when scrin down or with DVD.
OKAY.
According to the diagram that drove that chassis at the source carries 2 electrolytic. The 2 are changed. I commented on the voltage taken in the main electrolytic and at the output of + b. And audio.
Review welds well.
Control R805 0.33ohm 2W. Greetings.

Responder
luis tartaglia
hace 5 años

Glad to repair it.
You just need to give the location of said train.

Responder
leo 77
leo 77
285
hace 5 años
hace 5 años
Colleague, something similar happened to me once, there are some elements, I am not sure if they are ceramic capacitors, which connects the earth of the primary source with the secondary earth, they are usually leaking and when connecting the antenna generates the said problem. Luck.
oscar gomez2014
hace 5 años

Thanks to all the colleagues already solved the ceramic capacitor of 2A104j was leaking

Responder
leo 77
leo 77
285
hace 5 años

Great. Congratulations.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis