HIS NAME IS TRC MILIMETRIC LINEAR. (tube ray cathodic) the other is delta; FOR THE POSITION OF THE CANNONS OR CATODOS. MILIMETR, OKAY? THE TECHNICIANS MUST USE TECHNICAL TERMS UNTIL TECHNICAL ENGLISH.
YOU SHOULD USE THE YUGO AND PLATE OF THE SAME CINESCOPE OR TRC. AND HAVE THE CAP. AND PATIENCE TO GO PLACING IN YOUR PLACE ELEMENT BY ELEMENT. THERE IS A BOOK ON THAT THEME BY CARLOS ZETINA. LOOK FOR AND SUCCESS.
ok friend victor, I tell you that the original TV card has multiple holes to place different types of socalos. Well take out the socket of the thick tube and mount it on the trc plate to repair the pins match in that position with those of the trc plate of thick barrel check them pin by pin and that's fine.
Then I told him that the TV turned on but it has one more flaw and I think the problem is in the mother card I ask for suggestions.
The TV turned on but looks black and white when presenting the image, the blue screen looks normal and the numbers the same.
The problem is when giving an image, since they look black and white or without defined heat. It also has a kind of slight tab because the image is illuminated slightly intermittently. you can hear a little shriek with the fluctuation rhythm that could be generating the lighting. WHAT ARE YOU SUGGESTING
Good friend Víctor Thank you for the support provided, I tell you that the TV is ready, the lack of colors was due to the fact that all the color was lowered in the menu and the dye was placed all to the side so that is why I presented that image so weird. In relation to the fluctuation in the brightness of the screen I could not find that. I will continue trying not to give it as well because it is something very slight almost not noticeable but if it happens that the image lights a little intermittently.