Sankey ph08kx-n22 goes out and the writings of the image appear at rev
He does what the colleague Javier Chavez tells you with an image.
Reversing the wiring only of the yoke vertical section. Green and yellow. Or brown. Do not touch red or blue.
This based on your comment.
That only the letters are reversed.
What I don't believe is that solutions lack of width. That way.
Nor will the R468 resistor be switched off or heated. There is another problem.
If the noise sounds like trac trac. For me it's the flyback
Hello sorry for the delay, exchange the horizontal cables and the mirror effect was solved, I solved a cold weld that I observed and the TV does not turn off but the horizontal is always very hot and I really change the r448 but I would like they would give me the value of it and the screen is always small on the left and right sides and thank you very much for everything
If the yoke has been changed, there is a great possibility that it is the cause of the effects mentioned. Try to place a yoke of the characteristics of the original. Compare the impedances (ohmiaje) of the original yoke with that of the replacement yoke you have placed.
I already tried the yoke and it seems fine what I notice is that the card that goes in the tube gets too hot and I tried the fly back as I saw a video and on the pins that are more separated there is no continuity what I wonder is if Is the fly back bad because it gives an image? I hope you understand me and thank you for all your efforts to help those who do not know