Help tv sharp 29fl94 vertical line
it does not clarify if the line is from the bottom down on the screen ... or it is a line from left to right on the screen ... if it does not silence well that confuses colleagues ... if you have a left line right on the screen is a horizontal line ... not vertical..ok ..
You have to check the C681 of 0.33mfx250v and see if it is not open or badly welded ... if it has another 0.39mfx250v, it can also be used ... the L672 coil reviews its flooring ... measure continuity of the return track of the yoke q, it goes to the union of the diodes D673 and D605 ... review solders in the collector of Q602 ... with the tv off measure continuity from the collector of Q602 to the coil of the yoke- (red wire) and see if that track is not cut ... ok ...
Of those I just missed the c681 tomorrow I take it out and I inform you Greetings. And thanks for answering
Excuse me, my friend, I have capacitors of 0.36uf and 0.39uf of the same voltage, so far I don't have that one of 0.33uf X 250 to prove what he told me
colleague Robinson ... as he says he has a vertical line ... look closely xq, a vertical line is upside down in the center of the screen ... a hor line is from left to right in the center of the screen ... if you have a line hor, and you see part of the image on that line is xq, the hor, is working ... not so the vertical ... ok ... this is according to what, says more arriva. ..okay..
Thank you for your comment friend the line is vertical from top to bottom in the center of the screen
Thank you all for your comments it was indeed that capacitor cut c681 of 0.33 uf X 250v I placed one of 0.36 X 250v and so far it has been working for about an hour on excellent I give this question closed and 100% satisfied with this community