⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Tube TVs
Test conventional tv chassis on an ultraslim screen
hace 5 años
hace 5 años
Good morning to all the friends of the forum I would like you to clarify a question. A conventional 32 "TV chassis can be tested on a 21" ultraslim screen. Could or what damage could be caused by doing so?
17.741
hace 5 años
Hi- I have a generic plate for conventional TV and walking in a slim 29-
but it has a problem with geometry, vertical and horizontal parameters- and I don't have the control to make adjustments and see how far it gets to improve- but what are you doing-
hace 5 años
Thank you very much friend for your help. If it is not too much trouble the chassis is a sharp tv and the ultraslim screen is a SAMSUNG, I just want to test if the chassis works. Will the trc board be compatible?
17.741
hace 5 años
If the Sharp chassis has W / O parameter setting you may arrive. It's all about trying.
Or by changing the values of the components. Of the vertical and horizontal circuit.
I will leave you a photo in which I put a generic chassis for conventional TV to a Slim
17.741
hace 5 años
hace 5 años
This is the tv with conventional generic chassis. NOT for slim.
He walked out when he placed it. Only the inverted vertical. Of course, I corrected by exchanging the vertical yoke wires. With the advantage that this chassis has a vertical and horizontal adjustment preset. With which I managed to correct a little more. And since I have no control to see if I can adjust even more the same. I left it there until I bought control.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad