tv hypson 25htv-a710 replacement flayback
well victor and flaybac 154-177 has no letter in the beginning or in the end friend excuse my ignorance reads like this just
hello victor good thanks x answer me friend now tell me if you can replace the flayback L40B05700 happens that here where I am almost no flayback is achieved so why ask x replacements thank you friend
hello victor good look I put the flayback you told me on 154-177j and it makes me short the socket and disconnect it from the tube and just as short it does not come to be dense it makes continuous noise and the tv first turns on when I put it on but pestaneava the screen because the socket towards noise probe with another socket and the same thing does the same thing that I ask the flayback I put it is not new it may be that the fayback is bad tell me friend
hello victor if I cancel leg 7 of the flayback but it makes sparks with the socket disconnected from the tube or I disconnect the socket and it still makes sparks and noise in the socket
to victor something else, the flayback that I had did not send a remote pin instead 154-177j if it has a remote pin and do not connect it because the other flayback did not have it and neither was the hole in the plate to connect it I make the hole on the board and I connect it tell me
hello victor if you connect all the pins except pin 7 but this flayback brings an extra pin that is going away to gnd I made a hole to the board to be able to connect it because the other flayback does not bring that good pin the subject that when connecting that remote pin I stop making sparks on the tube but I have no image it looks all black and I uploaded the entire screem and nothing remains black channel change and the numbers are not seen or the screen is black but the tube turns on where am i still friend
well connect that pin with the abl and still no image and black screen and does not show or when I change the channel or the numbers where I'm still friend