good colleagues here I bring you the fault of this phillips tv that arrived without voltage on the scren dark screen, turn on with audio and all the secondary vltages well only the scren voltage is missing at zero V it desoldo from the soquer plate and the same no there is voltate neither low nor zero volt and nothing more was achieved by the moment. Coming to the conclusion that the FLYBACK is damaged which has the original BSC 25335584 which is the problem is sought but is not achieved and the replacement that I have at hand is the BSC293807B but this one carries internal condenser and the original does not, Now I ask you, is it compatible because I already installed the TV on but with the blank screen and the two pins of the capacitor jump spark and the scren does not regulate it is in 900volt if the low or up is the same, and the pins of the capacitor qm left over It can be done, it will be cut, there will be no problem, or it will be that this flay will also be damaged and since the 900volt scren does not come down I ask for your valuable help and collaboration.

Friend Romulo! The flyback you have is not compatible pin to pin. I mean they are not in the same order. My advice is that you identify each pin on the plate of the damaged one, and with a marker write it on the plate eg: abl, + b, collector, heater, etc. Thus, with another flaback also identified pin by pin you can replace it by making the graft to cables or cutting tracks. here a video Any questions here we are.