⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Tube TVs
The order of the legs is the same for all trc tubes?
hace 5 años
hace 5 años
I have the tube of a flat screen 21 inch kem brom TV that is sold out and I have a 21 inch flat screen philips TV that cannot be repaired due to a spare that is not achieved but the tube is fine, I also have a samsung of 21 flat screen whose jungle is short but he was fine, all three are big guns I want to know if they can be changed or how to adapt thanks for your help,
1.370
hace 5 años
if what can fail is in the image because the yoke can be different, or the filament is of less or more voltage, you can try with the two screens to see which one looks better
30.814
hace 5 años
Hello Friend. do not forget that the yoke has to fit well in the tube so that the image is not demagnetized
1.241
hace 5 años
You can use each screen as long as you have the original socket of each one to know where each function, voltage and GND pin goes. I have made these grafts with different brands but you should be very careful especially with the voltage of the color amplifiers 180V
On the other hand the YUGO must enter just and that is of the flat screen type.
1.594
hace 5 años
hace 5 años
Friend the screens are the same, only certain parameters must be taken into account
Screen size
the cannon is the same because there is thick and thin
the type of screen is flat slin or flat or those that are like curved
if all this on both screens resemble you can replace it with the certainty that it will work
17.741
hace 5 años
hace 5 años
the order of the legs is the same for all trc tubes?
hello. Answering your question.
Not all tubes are the same.
The distribution of the pins may vary.
You will notice looking at each plate that is placed on the TV tube and comparing it. If they go the same, try without fear.
Commonly on the plate says.
From right to left looking straight ahead. Counter-clock wise.
KB- H- H - KR- SCRIN - KG - G1.
If it doesn't say, you have to be guided by the form. Wiring Follow the path of 180v. The scrin cable. And filament this for all types of tube. You can even put a fine cannon. With the tube yoke in all cases and try how it looks. In other words, change complete tube and yoke.
you can measure the impedance of both yokes and compare it with that of the winding of the yoke to replace. The colleagues already guided you well.
Look . And thanks for rating the contribution. 
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad