Victor E

65.783

hace 5 años

The replacement is fine, the TV must have something else so it does not turn on.

miguel 86

2.160

hace 5 años

Did you measure the source of tension before placing the transient? regards

luciano cabrera

77

hace 5 años

Ok thanks I'm for taking the tn6q04 to measure it to see if it's short

Victor E

65.783

hace 5 años

To take it out, simply measure if it has voltage of + b. light the pilot?

luciano cabrera

77

hace 5 años

You know I don't know for sure

luciano cabrera

77

hace 5 años

It was short that I took Boy to proceed to measure the b +

luciano cabrera

77

hace 5 años

Sorry I did not understand the answer, you are right to measure from b + to tn6q

Victor E

65.783

hace 5 años

and yes, first repair the source and then place the horizontal transistor.

miguel 86

2.160

hace 5 años

As it does not indicate brand and model, but depending on whether you have that regulator at source, be very careful when testing, greetings

luciano cabrera

77

hace 5 años

Excuse me, Miguel, I just looked at your comment, I did not dare to measure it since I had to do it with the platelet understood. I proceeded to take it out. Model Sanyo c29lf41b TV

luciano cabrera

77

hace 5 años

Victor thanks Miguel also for his help I managed to make the TV work I found a yellow fuzzy resistor 663 place a 2amper fuse then move on to remove the large capacitor that was debarolisado did not have one Loving the same value go to place two in parallel, together With both yergue. At 250 microfararios. I put power and the TV came out thanks