daewoo tv model dtq-20v1ss with cn-001g board looks very little
The tv had the following failures. the regulator was bad since the tv in some scenes of a lot of light elnse turned off protecting itself. Replace it with the substitute yanq the original was not achieved. and I changed the filter c410 of 10uf 250vlo which was bad and the tv was repaired but looking not so illuminated. It does not look very dark but not too bright. Let's say I'm halfway. I say it because I have another TV the same and it looks very bright
that of q, it turns off it may be that, the protections act but before with the other regulator it had more brightness ... that is to say the image was good and clear ... the tension of + b as soon as it is ... measured it. ...? comment if it is the CN-001N chassis ...
It also didn't look good with the other regulator. What it was is that it turned off. help me a little what attention should I measure and where?
measure in C814-820 q, tension has ... deve haver 133v .... if that is ok bypass the R412 q, it comes out of pin9 of fli-bak q, feed the filaments and see if it improves the image on the screen .. .okay...