
I can give you a solution to that fault but I need you to pass photos of that TV on or a video to see fault and be able to help you immediately
I don't have a good camera, it looks like this all the channels, if I increase the contrast it looks very bright
so as not to shoot Divine better take pictures of that fault or a video since there are many similar failures
it can be the filter that feeds the cathodes of the screen that of 250v 22mf can be bad screen or if it looks like with spots it can be problems in the vertical stage, I will leave you an example of vertical failure as well as you describe what I understand
hello friend sorry for the delay I had no system (internet) I told you to check vertical at the entrance has 28 v the integrated 78041 check the circuit of the vertical is ok does not have the filter that 250v 22uf, if I found 250 v 10 uf I check it and comment
friend franklin j rodri, the reason for the imajen problem is the filter that feeds the cathodes, as you said voice, the problem was solved, thanks to your input, it is good to have friends like voice, a big hug and a handshake PD these slim TVs always have a problem, which heats the vertival heatsink a lot, I'll put a LA 78045 and a bigger heatsink