TV Civerlux
Good night: To get out of the way you can replace it with the 250 volt. If the space between components allows it, you can do it perfectly, I did it sometimes without dramas, the only drama that I see is that a capacitor of 33µF for 160 Volts must be cheaper than one of 250 Volts. Although I still have a varied stock of values, however, this is not for everyone possible for whatever reasons .... Well now I take the liberty to ask Hilmer What is it that rises a lot? Can you provide a better explanation please?
friend. There is no problem because the micro farads are of the same value of 33 and the value of the voltages does not regret even if the condenser is 250volt .--- the difference and it is not recommended that the bad condenser be 33ufx250volt. and put the one of 33uf x 160volt there because it is doing an inverse of volt. the one of 160volt could be exploited .--- this is for colleague hilmer romero with this it is not that he wants to enter a counter. Cheers
Of course, what should be avoided is improperly mixing the voltages. The tendency is that if one places the 250-volt capacitor instead of a 160-volt capacitor, the next one who watches the TV will tend to place a 350-volt capacitor, in case he finds it in poor condition again. The capacitors are somewhat expensive and of poor quality or of regular quality. But modern sources put the most demanded capacitors to work, those that are at the height of these requirements are not commercial, unless I know, it is usual to use 105 ° capacitors (Degrees)
