⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Tube TVs

How the BSC-26-01N4010F pins work on a Gplus 27 "TV

deyanira2011
hace 5 años
hace 5 años
Hi!!! My dad is a Technician and currently they have some problems with a TV, his intention is to make a flyback adaptation It has a 27 "GPLUS TV whose chassis is CY-PH3418TOP-TDA VER1.0 (DATE 2009-11-08) WITH A FLYBACK BSC-26-01N4010F; which I received from a client come with the funnel-like image. Checking it confirms that they placed a 21 "flyback. Looking for the plane I find some that correspond to the chassis but the operation of the flyback pins that are confirmed in physical are not the same. The one I have here seems to work as follows: Leg 1 goes to the yoke horizontal exit Leg 2 goes to the collector Leg 3 does not connect 4 + 126v leg Leg 5 does not connect Leg 6 connects with leg 1 Leg 7 earth Leg 8 Filament Leg 9 ABL Leg 10 180 V I appreciate any input in this regard.
neg2013
neg2013
14.048
hace 5 años

Good Night, if the TV turns on and has an image as a funnel, the fault does not have to be caused by the fly-back. It seems to me that it refers to a fault that originates because the YUGO has failed ... In some of those you can take something more clear, if you upload a photo of the fault ... Getting fly-back is a task complicated, since I am almost forgotten; I don't know that in some commerce in your area they bring you universal fly-backs

Responder
deyanira2011
hace 5 años

Grateful for the contribution ... tomorrow I will upload a photo

Responder
Jose Enrique
hace 5 años
hace 5 años
I was interested in what you say Deyanira, it is true that it says "neg2013" one of the problems is in the deflector yoke. The funnel-shaped image reflects that one of the Fields of the horizontal deflection coil is open, your dad has to check it and locate where the baffle coil connection is open, usually it happens by oxidation or sulfation that oxidizes one end of the wire. The 21 ”flybacks are not recommended for use on a 29” TV because the voltages do not match the characteristics of the 29-inch tube, since they emit lower last voltage, in addition to the necessary focus voltage of about 7KV compared with the 5KV delivered by the 21 "flyback. But this flyback, the" BSC26-01N4010F "has several tap, if you alter the supply voltages it fits the 29" tube for the ideal voltages. As the reference voltage between the B + and that of the video amplifier is 70V, therefore: if you feed the yoke on the B + with 130V, 200V will be obtained for the video stage. [/Size] [size=120] This is the flyback diagram “BSC26-01N4010F,” used by the TV-Daytron “DT21USSB” model among other models and seems to be similar to the following flyback series: TOSHIBA “ 8899CSCNGGGUV2, ”in addition to the“ BSC 26-N3601A, ”also the“ STV8172L-T471 ”and the“ 29-0127n. ”On this site you can expand the idea with these articles, this is the link: https://www.comunidadelectronicos.com/articulos/adaptacion-flyback-flyback-flyback-flyback-flyback-flyback-flyback-flyback-flyback-flyback-flyback-flyback-flyback .htm https://www.comunidadelectronicos.com/articulos/adaptacion-flyback-tv-parte2.htm
deyanira2011
hace 5 años

Happy day ... grateful for your response; the flyback has failures and when checking the yoke my dad found that he also has oxidation problems. In addition to this, repair is difficult due to the lack of spare parts.
I apologize for not writing before but we were very complicated due to force majeure ...
I thought your contributions were very important and we will try to be more active in the community ...
Thank you in advance ...

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis