⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Tube TVs

Philco model pfs2108 without green color

juan lucero
hace 5 años
hace 5 años
Hello friends, I ask for help with this TV that has SANYO chassis 1LG410Y0260A-C I got the same problem with the color green and red and blue not very saturated, check and test the colors with the resistance and the three colors appeared well, now every time I raise the screen and I raise the colors to the maximum the green color appears but the colors are very high. I hope you can give me a hand
nano cibernetica
hace 5 años
hace 5 años
Hello friend ... you already checked welds on the motherboard and on the socket of the screen. the 3 transistors of R, G, B in the socket of the screen ... it can be the screen with the cathode G (green) bad
juan lucero
hace 5 años

Hello, if I did everything you told me but it didn't work out

Responder
luis tartaglia
hace 5 años

Whenever a question is asked, everything done is commented. So do not suggest the same.

Responder
juan lucero
hace 5 años

Hello my friend, I'm sorry, I'm going to add what I measured and do

Responder
luis tartaglia
hace 5 años
hace 5 años
[b] Hi. See if this is the same chassis as your tv. And comment. https://www.yoreparo.com/ver-adjunto/aHR0cDovL2Nkbi55b3JlcGFyby5jb20vdXBsb2Fkcy9kZWZhdWx0LzAwMDEvMTcvc2FueW8tTEE4QS04MTQ5Mi5bZGY=[
luis tartaglia
hace 5 años

Fashion the voltages of the 3 cathodes (KR-KG-KB) and each video signal. RGB
And comment

Responder
juan lucero
hace 5 años

From what I see is the same thank you very much friend

Responder
neg2013
neg2013
14.048
hace 5 años
hace 5 años
Good evening, you have to measure tensions in the cannons of the TRC Red / Green / Blue = Red / Green / Blue = KR / KB / KG. Upload the results.
juan lucero
hace 5 años

Thank you for your input I tell you that I measured and the tensions in all three vary around 158v

Responder
Victor E
Victor E
65.783
hace 5 años
hace 5 años
Enter service mode and set drivers r, g, b, and see if it improves. greetings
juan lucero
hace 5 años

Thanks for your input, could you tell me how to enter service mode?

Responder
Victor E
Victor E
65.783
hace 5 años

Press the menu button on the TV and without releasing, the number or key 2 on the remote and enters service mode.

Responder
Javier Chavez C
hace 5 años
hace 5 años
Saturated colors? I get the impression that your problem is focused on the ABL circuit What effects do you see in the image or video by minimizing the color control. In good condition it should look black and white.
nano cibernetica
hace 5 años

Hello colleague, I am already re-opening the card in another Trc (screen) ...

Responder
juan lucero
hace 5 años

Hello friend, as I have another similar TV, I will do it and I will tell you how it went, thanks for your contribution

Responder
Javier Chavez C
hace 5 años

It does not answer my question regarding lowering the color command to a minimum

Responder
juan lucero
hace 5 años

Hi Javier excuse me there I did it and the screen is reddish and not black and white

Responder
Javier Chavez C
hace 5 años

Then the problem is on the screen. If you have another screen to do the test and the respective discard

Responder
juan lucero
hace 5 años

Well Javier really was the problem, I tried a similar one and it is great, thank you very much for your contribution .. How do I rate it?

Responder
Victor E
Victor E
65.783
hace 5 años

Nano Cibernetica said it first, the solution corresponded to him.

Responder
juan lucero
hace 5 años
hace 5 años
Well I share the solution, as Javier told me I did the test with another tube and it was indeed what was failing. thank you very much everyone for your contribution
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis